ABB REB670 Series Applications Manual page 375

1MRK 505 370-UEN D
RatedFltCurr : Rated fault current of the circuit breaker.
OperNoRated : Number of operations possible at rated current.
OperNoFault : Number of operations possible at rated fault current.
CBLifeAlmLevel : Alarm level for circuit breaker remaining life.
AccSelCal : Selection between the method of calculation of accumulated energy.
OperTimeDelay : Time delay between change of status of trip output and start of main contact
separation.
14.5 Event function EVENT
14.5.1 Identification
Function description
Event function
14.5.2 Application
When using a Substation Automation system with LON or SPA communication, time-tagged
events can be sent at change or cyclically from the IED to the station level. These events are
created from any available signal in the IED that is connected to the Event function (EVENT).
The EVENT function block is used for LON and SPA communication.
Analog, integer and double indication values are also transferred through the EVENT function.
14.5.3 Setting guidelines
The input parameters for the Event function (EVENT) can be set individually via the local HMI
(Main Menu/Settings / IED Settings / Monitoring / Event Function) or via the Parameter
Setting Tool (PST).
EventMask (Ch_1 - 16)
The inputs can be set individually as:
NoEvents
•
OnSet , at pick-up of the signal
•
OnReset , at drop-out of the signal
•
OnChange , at both pick-up and drop-out of the signal
•
AutoDetect , the EVENT function makes the reporting decision (reporting criteria for
•
integers have no semantic, prefer to be set by the user)
LONChannelMask or SPAChannelMask
Definition of which part of the event function block that shall generate events:
Busbar protection REB670
Application manual
IEC 61850 IEC 60617
identification identification
EVENT
S00946 V1 EN-US
Section 14
Monitoring
SEMOD167950-2 v2
ANSI/IEEE C37.2
device number
-
M12805-6 v11
M12811-15 v2
IP14590-1 v2
IP14841-1 v1
M12811-3 v3
M12811-5 v3
369