Configuration Example: M1740A Used With The E7770A Ciu - Keysight Technologies M1740A Getting Started Manual

Wireless test sets, mmwave transceiver

Table of Contents

Functionality

Configuration Example: M1740A used with the E7770A CIU

The E7770A Common Interface Unit is designed to act as an intermediary

between the M1740A and test sets which were not originally designed for

connection with the M1740A. In this example, the test signal to the DUT is

applied to the LO/Pwr/Ctrl/IF In port, and is routed to the IF input of the

upconverter. The same input also includes an LO input (supplied to both the

upconverter and downconverter in this case), together with control signals and

DC power. The signal returned from the DUT is downconverted and supplied at

the IF In/Out port.

Figure 4-5

M1740A used with E7770A

Getting Started Guide

For more detailed information about port usage on the E7770A, see the User's

Guide for the Keysight E7760A Common Interface Unit.

Table of Contents