Configuration Overview; Installation; Part & Materials - Baicells EG3015M-M30-HP Configuration Manual

1. Configuration Overview

The Baicells LteTurbo CPE is loaded with its own GUI for configuring its operating
parameters. You can log in to the GUI either locally through the Local Maintenance
Terminal (LMT), which is an Ethernet port, or remotely via IP address. You can also use
the Baicells Operations Management Console (OMC) to configure the CPE; this
document, however, focuses only on using the web GUI.

2. Installation

2.1 Part & Materials
Item
EG3015M-M30-HP unit
DC Power Adaptor
Qty Picture
1
1
1