Table of Contents
Advertisement
1. Configuration Overview
The Baicells LteTurbo CPE is loaded with its own GUI for configuring its operating
parameters. You can log in to the GUI either locally through the Local Maintenance
Terminal (LMT), which is an Ethernet port, or remotely via IP address. You can also use
the Baicells Operations Management Console (OMC) to configure the CPE; this
document, however, focuses only on using the web GUI.
The Baicells LteTurbo Outdoor User Equipment (UE) is part of a broadband wireless access
system that integrates with Long-Term Evolution (LTE) backhaul networks to provide
subscribers with Internet access. The UE, also referred to as Customer Premise Equipment
(CPE), communicates through a wireless connection to the operator's eNodeB's (eNB) at
cell sites located in the region. The eNBs communicate with the backhaul network.
2. Installation
2.1
Part & Materials
Item
EG8015Q-M11 unit
Qty
Picture
1
1
Advertisement
Table of Contents
