Configuration Overview; Installation; Part & Materials - Baicells BS6430E Configuration Manual

1. Configuration Overview

The Baicells LteTurbo BS is loaded with its own GUI for configuring its operating
parameters. You can log in to the GUI either locally through the Local Maintenance
Terminal (LMT), which is an Ethernet port, or remotely via IP address. You can also use
the Baicells Operations Management Console (OMC) to configure the eNB; this
document, however, focuses only on using the eNB GUI.
After the LteTurbo base station is powered on, it is necessary to configure the base
station to access the user and provide data service.
NOTE: Before configuring the BS's data, data planning needs to be done first. The data to configure
includes local parameters and connecting parameters. These parameters are either provided by the
user or determined after negotiation with the customers. The data to prepare include IP address, wifi
parameters, ngmwan parameters, software version, and so on.
The LteTurbo base station needs to configure at least the wifi name, password, and
working frequency.

2. Installation

Part & Materials
Item
Nova430T unit
Qty Picture
1