General Description; Buildup Powder Spray Gun Pea-C4-Hicoat (Enamel) - WAGNER PEA-C4-HiCoat Assembly And Operating Manual

Introduction
1.

General description

1.1

Buildup powder spray gun PEA-C4-HiCoat (Enamel)

B
A Fan spray nozzle
B Electrode
C Outer nut
D Spray gun body
The Corona automatic spray gun may only be used for conventional types of Enamel powder
that can be electrostatically charged.
The spray gun is used for industrial powder coating in automatic plants and can be operated
with individual control units or with control cabinet modules.
Caution
The operator must ensure that the spray gun is only connected to Wagner devices!
The distance of the installed spray guns to each other must be at least 300 mm.
High room temperatures and, in particular, laying hoses in areas exposed to sunlight in
factory buildings must be avoided!
To secure the spray guns, the "spray guns" control cabinet must be switched off!
4
C
A
0390860 – PEA-C4-HiCoat-Enamel
X
E
F
D
G
E Electrical connection
F Atomizing air connection
G Powder hose connection
Z Assembly dimension on the reciprocator
Article No. 0390011
G
X
76 mm
Peac4_Em_0001
00_Peac4_Em_Anwendung.doc
05/2007