Reflected Light Simultaneous Observation For Bf/Df - Olympus BXFM Instructions Manual

4-6 Reflected light simultaneous observation for BF/DF

1
Turn ON the main switch.
2
Select the brightfield (BF) observation.
3 Select the light path. (Trinocular tube only)
4 Place a sample on the stand.
5 Engage the 10X objective in the light path.
6 Bring the sample into focus.
10
Adjust the aperture diaphragm and the field diaphragm.
11 Engage the objective with the magnification to be used
in the light path and bring the sample into focus.
13 Insert the MIX slider for reflected light observation.
Start observation.
Remove the analyzer, polarizer or
filters from the light path.
7 Adjust the brightness.
8
Adjust the interpupillary distance.
9 Adjust the diopter.
12 Adjust the brightness.
Main switch of power supply
Observation method selector knob of the
reflected light illuminator
Light path selection lever of the trinocular
tube
Stage plate
X-axis / Y-axis knob of the stage
Nosepiece
Coarse / Fine focusing knob of the BXFM
frame
Brightness control knob of the power supply
Binocular tube
Diopter adjustment ring
Aperture diaphragm knob of the reflected
light illuminator
Field diaphragm knob of the reflected light
illuminator
Nosepiece
Coarse / Fine focusing knob of the BXFM
frame
Brightness control knob of the power supply
MIX slider for reflected light observation
BXFM
(page 16)
(page 16)
(page 18)
(page 18)
(page 18)
(page 19)
(page 20)
(page 21)
(page 23)
(page 23)
(page 30)
(page 27)
(page 19)
(page 20)
(page 21)
(page 47)
41