Olympus BXFM Instructions Manual page 72

c
e
d
d
b
2
c
66
b
a
2
f
a
d
4
3
4
Attaching the control box for coded function
The control box for coded function (U-CBS) must be attached
when combining the coded reflected light illuminator or the
coded revolving nosepiece with the microscope.
1
Align the screw holes a (2 positions) of the illuminator holder for BXFM
(BX3M-ILH) with the mounting holes b (2 positions) of the provided
bracket, and tighten the provided screws c to secure it.
2
Attach the hangers of the control box for coded function d (2
positions) by hanging them on the hooks e and f of the bracket.
5
Attaching the cable for motorized nosepiece
The cable for the motorized nosepiece (BX3M-RMCBL) must
be attached when combining the motorized nosepiece to the
microscope.
1
Align the mounting holes b (2 positions) of the cable for the motorized
nosepiece with the screw holes a (2 positions) on the illuminator
holder for BXFM (BX3M-ILH).
2
While pushing the metal plate of the cable for the motorized nosepiece
to the c position of illuminator holder for BXFM (BX3M-ILH), tighten
the provided screw d to secure the metal plate.
3
Connect the cable that comes out from the lower area of the illuminator
holder for BXFM (BX3M-ILH) to the connector of the FM control box
(BX3M-CBFM).
For connection of the cable for motorized nosepiece (BX3M-
RMCBL) with the FM control box (BX3M-CBFM), refer to the
instruction manual provided with the BX3M-CBFM.