SP-2000/X-Y
Powering Up The SP-2000/X-Y
A relay latching circuit ensures that if power is lost (even momentarily) the ped-
estal cannot restart automatically - it must be powered up manually.
1.
Before you power up a pedestal, first make sure that the head is turned off,
the MCB controller is in Remote and the area around the pedestal is clear.
2-4
Standby/Charge
Warning: At power up, the column (and payload) will drop to
a low level for a few seconds. Make sure that nobody will be
hit by any part of the payload.
Operation
Run
Stop
User Manual