Table of Contents
Advertisement
Copyright
The Vinten Inc. AutoCam User Manual is copyrighted with all rights reserved. Under
the copyright law, this manual may not be copied, in whole or in part, without written
consent from Vinten Inc.
© 1995 - 2001 by Vinten Inc.
Disclosure Statement - AutoCam System
This document contains information proprietary to Vinten Inc. Except by written
authorization from Vinten Inc., the information contained in this document shall not,
in whole or in part, be disclosed to third parties, reproduced for any purpose, or used
except for evaluation, operation and maintenance of equipment supplied by Vinten
Inc. or Vinten Broadcast.
Manual Outline
This manual covers the installation, operation and maintenance of the AutoCam SP-
2000/X-Y robotic pedestal. See Chapter 1 for a detailed description of the contents of
this manual.
Product Serial Numbers
Vinten AutoCam products are marked with unique serial numbers that include a 2
digit product identifier, a 4 digit serial number and a 2 character revision code. The
format is AABBBBXXCD where:
AA
Product Identifier - 80 for the SP-2000/X-Y
BBBB
Serial number
XX
Reserved for future use - currently 00
C
Primary revision status - 0, 1, 2, 3 etc.
D
Secondary revision status - 0, A, B, C etc.
This manual is applicable to products that have serial numbers 80xxxx0020 where
xxxx may be any 4 digit number.
TM
AutoCam
, Vinten Inc.
Vinten Inc. or Vinten Broadcast Limited.
Specifications and features are subject to change without prior notice.
(021601)
TM
and Lubricated Friction (LF
vi
TM
) are trademarks of
Advertisement
Table of Contents
