Table of Contents
Advertisement
SP-2000/X-Y
4.
Continue with steps 3 through 9 above.
After the pedestal is unloaded, and with this temporary power supply connected,
leave the pedestal in Standby/Charge mode overnight to charge the batteries.
Then you will be able to drive the pedestal to its final location using battery
power.
Or, if the pedestal is already in its final location, you can continue with mount-
ing the head, pressurizing the pedestal and the electrical installation.
Remove the E-STOP jumper plug from the power supply.
User Manual
Installation
3-9
Advertisement
Table of Contents
