SP-2000/X-Y
Pressurizing And Balancing The Pedestal
It is recommended that three people be available for this procedure.
TRAINED, AWARE OF THE CORRECT PROCEDURES AND AWARE
OF THE HAZARDS INVOLVED.
Pressurizing The Pedestal
1.
Make sure that the column locking pins are NOT installed - this will allow
the column to rise as the pressure is increased.
T Valve
Fill Switch
(Older
Pedestals)
Fill Hose
Purge Valve
3-12
DANGER: STRICT ADHERENCE TO THESE PROCE-
DURES IS CRITICAL IN ORDER TO AVOID ANY
BODILY INJURY TO PERSONNEL. ALL PERSONNEL
WORKING ON OR NEAR THE PEDESTAL MUST BE
DANGER: THE MAXIMUM CYLINDER PRESSURE IS
1,250 PSI (86 BAR).
USE ONLY THE VINTEN SUPPLIED MANIFOLD FOR
ADJUSTING PRESSURE.
4" Extension
Fill Valve
(1 of 3)
From Regulator
Installation
And Tank
User Manual