Cable Management; Powering Up - Vinten FHR-35 User Manual

Cable Management

To ensure a safe and tidy installation, all of the cables connected to
the head can be secured neatly using the cable management
bracket. Depending on the type of head mounting, the cables can
also be secured to the tripod leg or mounting bracket using the cable
ties provided.
CAUTION! Leave sufficient slack in the cables between the
fixed mounting and the head for free and full range of
movement.
CAUTION! Cables must be secured to the cable
management bracket when head is mounted to a tripod.
Ceiling mounted
Tripod or wall mount
FHR-35 Robotic Pan and Tilt Head FHR-35 Robotic Pan and Tilt Head

Powering Up

WARNING! Ensure that all personnel are clear from the
robotic equipment before powering up.
CAUTION! Disengage tilt lock before powering up.
Before powering up the head, ensure that all external cable
connections have been secured correctly.
To power up, press the power button located on the side of the head.
The head will not move when powered up, but zoom and focus
servos on the camera will take up their default positions on analogue
lenses.
The LEDs located at the rear of the head, indicate that data
communications (green LED) and a genlock signal (amber LED) is
present.
If the LEDs do not illuminate on power up, refer to the
Troubleshooting section of this manual.
Installation
21