Table of Contents
Advertisement
SP-2000/X-Y
4.
Using two or more people, lift the ramp out of the top of the crate. Insert
the two pins at the end of the ramp into the mating holes in the base of the
crate. Unfold the ramp onto the floor.
5.
Remove the four sides of the crate and set them aside.
6.
Using two or more people, lift the brace frame up and off the pedestal and
set it aside.
Ramp Attached To Base Of Crate (3 Side Panels Removed)
7.
Remove and set aside any other items (for example the head mounting
screws, MCB joystick controller, targets etc.) that were packed inside the
pedestal crate.
User Manual
Installation
3-5
Advertisement
Table of Contents
