Table of Contents
Advertisement
SP-2000/X-Y
Phone:
Fax:
You may want to include a rope in the cable bundle to add bulk and make it
easier for the pedestals to push the bundle out of the way as they move
around.
10. Connect the power/data cable from the Power/Data Out connector on the
SP-2000/X-Y rear panel through the cable clamp to the pan/tilt head.
11. Tighten the cable clamp.
The installation of the AutoCam targets which are required for automated opera-
tion is covered in the User Manual for your controller (e.g. ACP-8000P).
The SP-2000/X-Y is now ready for operation. Refer to Chapter 2 of this manual
and the User Manual for your controller.
User Manual
Techflex Inc.
50 Station Road
Sparta NJ 07871
+1 973-729-6253
+1 973-729-9320
Installation
3-21
Advertisement
Table of Contents
