Using Magic Files - Universal Robots UR10 Service Manual

4.3 Using Magic files

For easy backup, Universal Robots provides Magic files to automatically copy data from controller to USB-
stick.
These files are available:

URmagic log file

URmagic backup programs

URmagic configuration files

URmagic upload programs

URmagic screenshot
Go to www.support.universal-robots.com/download
A login is required, which is only available to Distributors.
Please note: If representing an end customer, contact the Distributor from which the robot has been
purchased to request Magic files.
Instruction for using Magic files

Download Magic file.

Save it in the root folder on a USB-stick.

Insert USB-stick into USB-connector on right-hand side of teach pendant.

After a few seconds a red
the USB-stick, while the file will do its magic.

Await a green <- USB

Remove USB-stick and the process is complete.
The Magic file creates a folder on USB-stick named with the serial number of robot.
If more than one magic file is on USB-stick, they will be run in sequence; the warnings will then appear for
each file. Do not remove the USB-stick until after the last file has been run. Multiple folders will be created
and named with serial number plus a sequential no, like 201430xxxx_0, 201430xxxx_1etc.
All rights reserved
Function:
copies the entire log history file to USB-stick
copies all programs and installation files to USB-stick
copies all configuration files to USB-stick
copies all programs and installation files from USB-stick
generates a screenshot of GUI when USB-stick is inserted
! USB ! -sign will appear on the screen, this is a warning not to remove
-sign appears on the screen, the USB-stick can then be safely removed.
57
to download Magic files.
Servicemanual_UR10_en_3.1.1