3.2.6 Frequency Conversion Mode_ Dual Input_ Single Unit
NOTE:
1. Frequency Conversion mode is only applicable to single UPS but not to parallel
2. When the UPS runs in Frequency Conversion mode, once the inverter becomes
To activate Frequency Conversion mode, please refer to
After the UPS is manually set in Frequency Conversion mode, the inverter will automatically
the system will automatically disable the bypass function. Please note that, once the
inverter shuts down, there is no bypass output. For the diagram of Frequency Conversion
mode, please see
LED illuminates green and the text 'Frequency Conversion' appears in the upper right
corner of the screen.
BYPA.
MAIN
Batteries
UPSs.
,
. During Frequency Conversion mode, the UPS's tri-color
Q3
Q2
Q1
Q5
and
Static Switch
Rectifier
Inverter
3-19
3
Operation Modes
.
LOAD
Q4