Storage Warnings; Standard Compliance - Delta Modulon DPH Series User Manual

1. Remove watches, rings, or other metal objects.
2. Use tools with insulated handles.
3. Wear rubber gloves and boots.
4. Do not lay tools or metal parts on top of the batteries.
5. Disconnect charging source and loads prior to installing or maintaining the batteries.
6. Remove battery grounds during installation and maintenance to reduce likelihood of
shock. Remove the connection from ground if any part of the battery is determined
to be grounded. Please note that the battery grounds mean any battery pole (+/ -)
connecting to the ground.
You must contact Delta customer service if any of the following events occurs:
1. Any liquid is poured or splashed on the UPS.
2. The UPS is deformed.
3. Any conductive powders or metals enter into the UPS.
4. The UPS does not run normally after carefully following the instructions in this
1.4

Storage Warnings

Use the original packing material to pack the UPS to prevent any possible damage from
rodents.
If the UPS needs to be stored prior to installation, it should be placed in a dry indoor
area. The allowable storage temperature is below 70°C and relative humidity is below
95%.
1.5

Standard Compliance

EN 62040-1
EN 61000-6-4
EN 62040-2 Category C3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
.
1
EN 61000-4-6
EN 61000-4-8
EN 61000-2-2
YD/ T 2165-2010
YD 5083-2005
YD/ T 5096-2016
1-5
Important Safety Instructions