Communication Interfaces (Ii): At The Rear Of The Touch Panel - Delta Modulon DPH Series User Manual

4.2 Communication Interfaces (II): at the Rear of the Touch
Panel
The following communication interfaces are located at the rear of the touch panel. Please
refer to
No.
1
2
3
4
5
6
7
Modulon DPH Series
and the table below.
1 2 3
B A
D
B A GN
GN D
BM S
RE SE T
MO DB US
4 5 6 7
Item
RESET
MODBUS
(RS-485 Port)
BMS
DISPLAY
EMS/ CONSOLE
(USB Port × 2)
(Network Port)
(Internal View with Two Front Doors Open)
INP UT SWI
BYP ASS
SW ITC H
MAN UAL
BYP ASS
OUT PUT
SW ITC H
Press the RESET button once to restart the LCD.
1. Provides MODBUS RTU communication service.
2. Connects to a user-supplied monitoring system.
Connects to the Delta battery management system
(optional). The BMS function is only applicable to lead-acid
batteries.
Before shipment, the DISPLAY port has been connected.
Connects to a user-supplied environmental monitoring
system or Delta EnviroProbe 1000 (optional).
There are two USB ports. Connects a user-supplied USB
1. Provides network communication service (including
SNMP, MODBUS TCP, HTTP, HTTPS, etc.).
2. Connects to a user-supplied monitoring system.
4-14
TCH
SW ITC H
Function