Display Port; Repo Dry Contacts - Delta Modulon DPH Series User Manual

4.1.1 Display Port

Before shipment, the display port has been connected to the 10" touch panel with the
designated cable in Delta factory.

4.1.2 REPO Dry Contacts

The REPO dry contacts provide you with quick and convenient interfaces to shut down the
UPS safely when an emergency occurs. Connect the REPO dry contacts to a user-supplied
switch and you can remotely shut down the UPS. The REPO dry contacts provide normally
open (NO) and normally closed (NC) these two options for use.
Screw x 2
DISPLAY
EXT. BATT
TEMP.
BT1 BT2
REPO
NC NO
BT3 BT4
Dry Contact Card
Modulon DPH Series
Buffer
Buffer
NOTE:
If you want to enable the normally closed (NC) function, please take out the dry
contact card (see
you turn on the UPS.
O/P DRY I/P DRY
EXT.SWITCH
CONTACT CONTACT
STATUS
S1 S2 P1 P2
P1 P2 P3
S3 S4 P4 P5 P6 P3 P4
REPO
NC NO
5V
3
4
5V
1
2
UPS
) and remove its Jump CNR3 (see
PARALLEL
PARALLEL USB
4-4
NO
NC
RS-232
) before
BATT.
START
BATT.
START