Module Error - Fujitsu fi-8190 Operator's Manual

An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code
L0
L2
L5
L6
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 222)
● Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in
Service Provider (page 330)
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.

Module Error

If a module error occurs, the the following is displayed on the operator panel.
● For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code
M1:D5
● For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code
n1
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in
Service Provider (page 330)
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
Error Details (displayed in the Error Recovery Guide window)
Sensor error
and then contact the distributor/dealer where you purchased this product. Refer to
Error Details and the Solution
M1:D5 Error
Wired LAN error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
Error Details (displayed in the Error Recovery Guide window)
—
and then contact the distributor/dealer where you purchased this product. Refer to
268
Troubleshooting
to clean the ultrasonic sensors.
Before You Contact the Scanner
Before You Contact the Scanner