Fujitsu fi-8190 Operator's Manual page 63

10
Connect the scanner to the computer as follows.
a
Connect the computer to a network device via a wired LAN or Wi-Fi (
The procedure below shows an example of connecting the computer to a network device via a wired
LAN.
For details about how to connect the computer to the network, refer to your computer manual.
b
Connect the scanner to the network device via a wired LAN (
c
Connect the power cable to the scanner and the AC outlet (
d
Turn on the scanner.
For details, refer to
11
Click the [Select a Scanner] button in the [How to Connect the Scanner] window.
The [Scanner Selection Tool] window appears.
12
In the scanner list, select the IP address of the scanner that you want to use.
The default scanner name is "(Model Name) - (Serial No.)".
The serial number is printed on the label on the back of the scanner, so remove the ADF paper chute (feeder)
to check the number. For details, refer to
For details about Scanner Selection Tool, refer to the Network Setup Tool for fi Series Help.
The browser opens and the login window for fi Series Network Settings appears.
13
Enter the administrator password, and click the [Login] button.
For details about the administrator password, refer to
The [Scanner Information] window for fi Series Network Settings appears.
14
Specify the following items:
Specify each setting item on each web page and click the [Apply to the scanner] button.
How to Turn the Power ON (page
Checking the Product Label (page
Admin Password (page
63
).
).
, ).
72).
332).
415).
Scanner Setup