Fujitsu fi-8190 Operator's Manual page 160

3
Press the [ ]/[ ] button to select [13: Doc Counting Mode], then press the [Scan/Enter] button.
The [Doc Counting Mode (More documents)] screen is displayed on the LCD.
4
Load documents in the ADF paper chute (feeder), and press the [Scan/Enter] button.
The scanned documents are counted.
The number of counted sheets is displayed in [Count].
ATTENTION
Documents may not be counted correctly if overlapped documents are detected during scanning.
HINT
● To clear [Count], press the [Stop/Clear] button while the [Doc Counting Mode (More documents)] screen
is displayed.
● To end Doc Counting Mode, press the [Stop/Clear] button for three seconds or longer while the [Doc
Counting Mode (More documents)] screen is displayed.
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
160