How To Use Settings Menu - Fujitsu fi-8190 Operator's Manual

How to Use Settings Menu

This section explains about Settings Menu.
When you press the [Menu] button while the [Ready] screen is displayed, the [Settings Menu] screen appears.
The Settings Menu can be used to configure various operational settings upon scanning.
There are two menus in the [Settings Menu] screen.
● User menu
You can configure basic settings for operating the scanner and using the operator panel.
● Administrator menu
You can configure advanced settings for operating the scanner and using the operator panel.
To switch between the menus, press down both the [
longer while the [Settings Menu] screen is displayed.
When the scanner is turned off, the menu is switched to the user menu.
This section explains how to use the Settings Menu of the operator panel according to the following categories.
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
] and [ ] buttons at the same time for three seconds or
146