Performing A Scan With An Image Scanning Application - Fujitsu fi-8190 Operator's Manual

Performing a Scan with an Image Scanning Application

This section explains about the basic flow of performing a scan using an image scanning application on the
computer.
In this case, a scanner driver and an image scanning application that supports the scanner driver must be installed
on the computer.
The following scanner driver and image scanning applications are bundled with the scanner:
● Scanner driver
- PaperStream IP driver
● Image scanning application
- PaperStream ClickScan
- PaperStream Capture
- PaperStream Capture Pro (EVALUATION)
HINT
● For details about the scanner driver and image scanning applications, refer to
Software (page 42).
● Scanning procedures, operations, and scan setting items slightly vary depending on the scanner driver and the
image scanning application.
For details, refer to the help for your scanner driver and the manual/help for your image scanning application.
1
Turn on the scanner.
For details, refer to
2
Load a document in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
For details, refer to
How to Turn the Power ON (page
How to Load a Document in the ADF Paper Chute (Feeder) (page
Overview of the Bundled
72).
95
How to Perform a Basic Scan
113).