Conditions For Mixed Batch Scanning - Fujitsu fi-8190 Operator's Manual

Conditions for Mixed Batch Scanning

The following conditions apply when a mixed batch of documents with different paper weights/friction
coefficients/sizes is scanned.
Make sure to test a few sheets first to check if the mixed batch of documents can be fed.
For details about scanning, refer to
Paper Direction
Align the direction of the paper fiber with the feed direction.
Paper Weight (Thickness)
When scanning documents with different paper weight in the same batch, keep the paper weight within
the following range:
2
27 to 413 g/m
Friction Coefficient
It is recommended that the same paper brand from the same manufacturer is used for documents.
When different paper manufacturers/brands are mixed in documents to be scanned, it affects the feeding
performance as the difference in friction coefficient increases.
The following friction coefficients are recommended:
0.35 to 0.60 (reference value for paper friction coefficient)
Document Position
Load all documents covering the width of the pick roller (approx. 39 mm/1.54 in. wide).
Scanning Documents with Different Widths (page
(7.2 to 110 lb)
127
How to Load Documents
176).