Document Loading Error; Multifeed; Sensor(S) Dirty - Fujitsu FI-800R Operator's Manual

Document loading error

If a document loading error occurs, the LED indicator lights up as follows.
Lights up (orange) Document loading error
If documents are inserted into the return path opening and are loaded in the ADF paper chute (feeder) at the
same time, remove either of the documents, and start scanning again.
If the problem persists, refer to
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.

Multifeed

If a multifeed occurs, the LED indicator lights up as follows.
Lights up (orange) Multifeed
If documents remain in the scanner, refer to
If documents are overlapped and fed into the scanner frequently, take measures according to
Documents Are Frequently Fed into the Scanner (page
If the problem persists, refer to
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.

Sensor(s) dirty

If sensors are dirty, the LED indicator lights up as follows.
Lights up (orange) Sensor(s) dirty
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 89)
● Turn the scanner off then back on.
If the problem persists, refer to
140) and take measures accordingly. If the problem still persists, write down the status of the LED indicator and
contact the distributor/dealer where you purchased this product. Refer to the contact information in the Contact
List if supplied with this product, or refer to the contact information in the Contact for Inquiries section if
provided in Safety Precautions supplied with this product, and then make an inquiry.
The First Measures to Take When You Encounter any Errors or Troubles (page
When a Paper Jam Occurs (page 103)
The First Measures to Take When You Encounter any Errors or Troubles (page
Clean the document sensor.
The First Measures to Take When You Encounter any Errors or Troubles (page
126).
to clean the document sensors.
107
Troubleshooting
to remove the documents.
Overlapped