Area Not To Be Perforated - Fujitsu fi-8190 Operator's Manual

Area Not to Be Perforated

An error may occur when there are punched holes in the area colored in light pink in the Figure 1.
Use the flatbed [fi-8290/fi-8270/fi-8250/fi-8250U] to scan such documents.
Fig. 1
ATTENTION
The above condition applies when the document is set to the center of the pick roller width.
HINT
If there are any holes in the 35 mm-wide central column, you can move the document to the left or right to
avoid an error.
124
How to Load Documents