Fujitsu fi-8190 Operator's Manual page 203

For details, refer to the help for the scanner driver.
b
Set a timeout time.
- For fi-8190/fi-8290/fi-8170/fi-8270
Use one of the following methods to set a timeout time.
● In [17: Manual Feed Timeout] on the [Settings Menu] screen of the operator panel, set a
timeout time.
For details, refer to
● In the Software Operation Panel, set a timeout time.
For details, refer to
- For fi-8150/fi-8250/fi-8150U/fi-8250U
In the Software Operation Panel, set a timeout time.
For details, refer to
ATTENTION
For details about the paper weights of the documents that can be scanned, refer to
(Paper Weight) (page
When a document folded in half is scanned, the document may be fed skewed if the folded part is too
thick.
2
Load a document in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
To scan a multi-layered transfer paper, position the bound edge first when loading the paper.
How to Use Settings Menu (page
Waiting Time in Manual Feeding [Manual Feeding] (page
Waiting Time in Manual Feeding [Manual Feeding] (page
118).
203
Various Ways to Scan
146).
388).
388).
Document Thickness