Scanner Setup - Fujitsu fi-8190 Operator's Manual

Scanner Setup

This section describes the software that is required for the computer you want to connect the scanner to, the system
requirements, and the scanner setup method.
The scanner setup procedure depends on the connection method of the scanner.
Check the reference page for each method to set up the scanner.
For details about required actions to set up the scanner, refer to
(page 12).
●
Operating with a Computer
Connecting the Scanner via a Wired LAN in order to Operate It with a Computer (When Obtaining an IP
Address Automatically) [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 47)
Connecting the Scanner via a Wired LAN in Order to Operate It with a Computer (When Assigning an IP
Address Manually) [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 52)
Manuals to refer to when setting up the scanner
40