Figure 8-11 Spp Com1 Serial Redirection - Emerson ATCA-8310 Manual

CPLD and FPGA
8.2.3.15.3 SPP COM1 Serial Routing
The IPMC controls the serial redirection of the SPP serial interface COM1 with the signal
COM_ROUTE_C.
Figure 8-11
SPP
COM1
8.2.3.16 Reset Domain Control
The SPP is responsible for all rest domains
Reset signal for each reset domain can be controlled (assert/negate)
Reset domains are TBD. Minimum:
— GPP CPU block
— Broadcom switch + SRIO
— ARTM
— SPP and everything else (when HRESET_REQ is driven)
Reset configuration register keeps unchanged, when HRESET is asserted.
368
SPP COM1 Serial Redirection
Glue Logic FPGA
SPP_COM1_TXD
SPP_COM1_RXD
COM_ROUTE_C
COM_ROUTE_C = 0:
COM_ROUTE_C = 1:
SPP_FP_COM_TXD
SPP_FP_COM_RXD
TS_COM2_RXD
TS_COM2_TXD
ATCA-8310 Installation and Use (6806800M72D)
SPP Front
COM
Terminal
Server 2