Table 8-134 Fault Event Enable Register - Emerson ATCA-8310 Manual

CPLD and FPGA
Table 8-133 Fault Event Status Register (continued)
Address Offset: 0x82 - 0x83
Bit Description
5 DMC Base Fault
0: No event
1: DMC Base Fault occurred.
6 DMC 1 Fault
0: No event
1: DMC 1 Fault occurred.
7 DMC 2 Fault
0: No event
1: DMC 2 Fault occurred.
8 RTM Fault
0: No event
1: RTM Fault occurred.
9 SPP Reset:
0: No event
1: SPP reset occurred or power-up cycle
Note: Bit is not maskable
15:10 Reserved

Table 8-134 Fault Event Enable Register

Address Offset: 0x84 - 0x85
Bit Description
0 SPP Watchdog expired enable:
0: Event disabled
1: Event enabled
1 Software Fault 1 enable:
0: Event disabled
1: Event enabled.
330
Default
Ext.
Ext.
Ext.
Ext.
1
0
Default
0
0
ATCA-8310 Installation and Use (6806800M72D)
Access
SPP: r/w1c
SPP: r/w1c
SPP: r/w1c
SPP: r/w1c
SPP: r/w1c
r
Access
SPP: r/w
SPP: r/w