White Balance; Color Space; Wall Color - Barco G62 User Manual
Hide thumbs
Also See for G62:
- User manual (124 pages) ,
- Installation manual (90 pages) ,
- Installation manual (22 pages)
Table of Contents
Advertisement
User controls – Image menu
Reset
Reset the digital zoom and shift settings to their factory default values.
8.9 White balance
About white balance
Adjust the overall tint of the image to optimize the white color performance.
Color temperature
Select the color temperature of the projected image.
The available options are:
•
Warm
•
Standard (default)
•
Cool
Gain/Offset (RGB)
Gain and offset are individual controls for each RGB channels used to set grey scale. The Gains calibrate the
color of the dark parts and Bias calibrate the white parts.
•
Red / Green / Blue Gain:
Adjust the color of the image's bright areas.
•
Red / Green / Blue Offset:
Adjust the color of the image's dark areas.
White peaking
Adjusts the image color brightness while providing more vibrant colors, in increments from 0 to 10.
Reset
Reset the function settings to factory default values.
8.10 Color space
About color space
Select a color space that has been specifically tuned for the input signal:
•
Auto (default)
•
RGB (0-255)
•
RGB (16-235)
•
REC709
•
REC601
8.11 Wall color
About wall color
Set the wall color of the projector to achieve best color performance for a specific wall.
The available options are:
•
Off (default)
•
Blackboard
•
Light yellow
50
R5914653 /10
G62
Advertisement
Table of Contents
