Alignment Of A Table Mounted Projector - Barco Medea series Installation Manual

How to installing the power cord
1. Connect the female side of the power cord with the power input socket of the projector (reference 1).
Image 4-7
2. Secure the power plug by locking the plug holder clamp (reference 2).
Please, do not connect the power cord in the AC outlet. The projector is not equipped with a main
power switch. If you connect the power cord, the projector will begin warming up. The sources
should always be connected before the projector is powered up.

4.6 Alignment of a table mounted projector

How to align
1. Place the projector in the desired location. Take into account the zoom range of the used lens and the size of
the screen.
2. Project one of the internal hatch patterns on the screen.
3. Turn the adjustable feet in or out until the projected hatch pattern has a perfect rectangle shape and is leveled.
Image 4-8: Level alignment
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
Image 4-9: Angle adjustment
Physical Installation
R5906141 /02 Medea series 35