Heartland VALUE Series Assembly Manual page 10

FLOOR PANELS (NOT INCLUDED)
PARTS REQUIRED:
x1
x1
3/4 x 23-7/8 x 92-5/8"
(1,9 x 61 x 235 cm)
3/4 x 23-7/8 x 96"
(1,9 x 61 x 244 cm)
3/4 x 48 x 92-5/8"
(1,9 x 122 x 235 cm)
4
Continue installing panels with rough side up (painted grid lines).
5
Use a chalk line or grid lines on panels for 2" nails 6" apart on edges
and 12" apart inside panel. .
FINISH
You have finished Installing your floor panels.
6
96"
(244 cm)
Flush
23-7/8"
(61 cm)
Flush
92-5/8"
(235 cm)
23-7/8" 48"
(61 cm) (122 cm)
Flush
x1 3/4 x 23-7/8 x 23-7/8"
(1,9 x 61 x 61 cm)
2" (5 cm) x154
x1
120"
(305 cm)
23-7/8"
(60,6 cm)
116-5/8"
(296 cm)
6" (15 cm)
12" (30,5 cm)
14
Flush
HINT:
Grid lines UP.
BACKWALL
SIDEWALL
IMPORTANT!
I M P O R T A N T !
Check the floor frame is level after installing floor panels. Re-level if needed.
• The floor should be used as a level work surface for wall construction.
• Organize your wall sections during subassembly
to avoid over-handling of the walls.
15
SIDEWALL
FRONTWALL