Code
PV1
PV2
PVA
PID feedback error
PVb
PVC
CoF
Current input break detection
ECF
Enable circuit failure
ECL
Customizable logic error
rLo
Stuck prevention
FoL
Filter clogging error
LoK
Password protection
Err
Mock alarm
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Table 5.1 Quick List of Alarm Codes(Continued)
Name
5-2
Description
The PID feedback signal wire is broken under PID control.
A break was detected in the current input.
The Enable circuit was diagnosed as a circuit failure.
A customizable logic configuration error has caused an
alarm.
The inverter failed to start due to overcurrent.
An overload state was detected under PID control.
A wrong password has been entered exceeding the
predetermined number of times.
A mock alarm has been generated intentionally by
configuring H45 or keypad operation.