Fuji Electric FRENIC-HVAC Manual page 105

Auxiliary main circuit power
input terminals (R1, T1)
Supply voltage switching
connector (CN UX)
Figure 2.7 Switching Connector Locations (400 V class series inverters of 160 kW (250HP) or above)
Figure 2.8 Attaching and Removing a Switching
Connector
(200 V class series inverters of 22 kW (30HP) or
above and 400 V ones of 45 kW (60HP) or above)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To remove a connector, squeeze the top of
the latch between your fingers to release the
fastener and pull off the connector. To attach
a connector, push it until it makes a clicking
sound to ensure that the fastener is securely
seated.
2-21
Auxiliary control power
input terminals (R0, T0)
Main power supply switching
connectors (CN R, CN W)