Information Mode Print Sample - Toshiba B-EX4 Series Maintenance Manual

6. ON LINE MODE
(3) Before shifting to the Information mode, make sure that the printer has not received any commands
related to feed or drawing.
performed and the printer will return to the normal state. At this time, a quick reset will not be
performed.
(4) Do not send a command to the printer in the information mode.

6.8.3 Information Mode Print Sample

<Print sample 1>
B-EX4T1: Max. number of digits: 25 mm, Center-aligned
<Applicable model> B-EX4T1-G/T-QM/CN C1.1A
//
B-EX4T2: Max. number of digits: 25 mm, Left-aligned
<Applicable model> B-EX4T2-G/T-QM/CN C1.1
320000000cm
125984251.9"
<Print data 1>
Item Information
1st line Feed amount in the information mode (Unit: cm)
2nd line Feed amount in the information mode (Unit: inch)
<Print sample 2>
B-EX4T1: Max. number of digits: 74 mm, Center-aligned
<Applicable model> B-EX4T1-G/T-QM/CN C1.3 or later
TOTAL COUNTER LIST
MM-dd-yyyy hh:mm
xxxxxxxxxxxxxxxx
S/N:zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
PRINTER aaaaaaaaacm
//
If the printer has received such commands, printing will not be
320000000cm
125984251.9"
// //
//
Max. number of digits: 25 mm
Effective print width
bbbbbbbbb.binch
// //
//
Max. number of digits: 25 mm
Effective print width
Max. number of digits: 74 mm
Effective print width
6-21
6. 8 INFORMATION MODE
Range
0 to 320000000
0 to 125984251.9
EO18-33027