Toshiba B-EX4 Series Maintenance Manual page 165

5. SYSTEM MODE
5.8 RAM CLEAR

Outline of RAM Clear
In the RAM Clear mode, clearing the Maintenance Counter and initializing the Parameters are possible.
After replacing the print head, ribbon motor, or platen, perform maintenance clear.
Contents of RAM CLEAR menu
<B-EX4T1, B-EX4T2, B-EX6T2>
MENU ITEM
SYSTEM MODE
<6>RAM CLEAR
NO RAM CLEAR
MAINTE.CNT CLEAR
PARAMETER CLEAR
<B-EX4D2>
MENU ITEM
SYSTEM MODE
<6>RAM CLEAR
NO RAM CLEAR
MAINTE.CNT CLEAR
PARAMETER CLEAR
(NOTE)
NOTE: For the B-EX4D2 D1.1 or later, the displayed order has been changed as follows.
PARAMETER CLEAR
QM TYPE
QQ TYPE
CN TYPE
ALL COUNTER
FEED
PRINT
CUT
OTHER
QM TYPE
JA TYPE
CN TYPE
ALL COUNTER
FEED
PRINT
CUT
OTHER
QQ TYPE
QM TYPE
CN TYPE
5-69
EO18-33027
5.8 RAM CLEAR