Toshiba B-EX4 Series Maintenance Manual page 80

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.10.5 RFID Module Settings
After installing the RFID Module on the printer, configure the RFID module settings in the printer system
mode.
 How to enter the System Mode
Power OFF
Turn on the printer while holding
down [FEED] & [PAUSE] or
[MODE].
SYSTEM MODE
<1>DIAG.
<2>PARAMETER SET
<3>ADJUST SET
<4>TEST PRINT
 Contents of the RFID Menu
Menu Sub menu
RFID TEST
MODULE
RETRY
UHF SETTING
OTHER
 Key functions in the system mode
Key
[MODE]
[CANCEL] or
[FEED]+[RESTAR]
[ENTER] or [PAUSE]
[UP] or [RESTART]
[DOWN] or [FEED]
[LEFT]
[RIGHT]
Press [DOWN] until
"<10>RFID" is
highlighted.
Parameter
ID READ
MODULE TYPE
COUNTRY
TAG
RF CHANNEL
ADJ RETRY POSITION
ISSUE RETRY LABELS
READ RETRY
WRITE RETRY
POWER LEVEL
Q VALUE
AGC THRESHOLD
WRITE AGC THRESHOLD
WRITE RETRY MIN AGC
TAG CHECK
MULTI WRITE
CARRIER SENSE
Function
Returns to the mode menu screen.
Returns to the upper hierarchy.
Displays a next screen.
Saves the setting and returns to the upper hierarchy.
Moves the cursor upward.
Increases a value.
Moves the cursor downward.
Decreases a value.
Moves the cursor to the left.
Moves the cursor to the right.
4.10 UHF RFID KIT (B-EX700-RFID-U4-US/EU/CN-R)
SYSTEM MODE
<7>INTERFACE
<8>BASIC
<9>FOR FACTORY
<10>RFID
4-62
EO18-33027
(Revision Date: Sept. 5, 2014)
Press [ENTER].