Toshiba B-EX4 Series Maintenance Manual page 68

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.10.2 Attaching the Ribbon Guide
1. Turn the Head Lever to Free position and open the Ribbon Shaft Holder Plate.
Head
Lever
2. Open the Print Head Block.
Print Head Block
3. Remove the E-Ring from the left-hand Ribbon Guide Shaft, as viewed from the Head Lever side, and
remove the Ribbon Guide Shaft.
Ribbon Guide Shaft
When viewed from the lower front side
Free
4.10 UHF RFID KIT (B-EX700-RFID-U4-US/EU/CN-R)
NOTE: Keep the removed Ribbon Guide
Shaft safe for future use.
E-Ring
4-50
EO18-33027
(Revision Date: Sept. 5, 2014)
Ribbon Shaft
Holder Plate