Wireless Lan Board (B-Ex700-Wlan-Qm-R) - Toshiba B-EX4 Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

4.7 WIRELESS LAN BOARD (B-EX700-WLAN-QM-R)

The following parts are supplied with the kit. Make sure you have all items shown below.
Wireless LAN Board (1 pc.)
Installation Manual (1 copy)
NOTES:
1. MAC address of the Wireless LAN module will be
necessary when setting the MAC address filtering function
of an access point. As it is printed on the WLAN card,
write it down on the Installation Manual before mounting
the covers so that an end user can know the MAC address.
2. Be careful not to hit or damage the antenna when installing
this kit. A damaged antenna may affect the performance.
3. This module cannot be used together with the B-EX700-RS-QM-R Serial Interface Board.
Country/Region Code
As available frequency bands are different from country/region to country/region, a proper country/region
code must be set before installing the wireless LAN board on a user's printer. Use of a wireless LAN
module with a wrong country/region code could violate each country's Laws and Regulations for Radio
Equipment, and violators could be subject to penalties.
For the country/region code setting, please ask TOSHIBA TEC subsidiaries.
Antenna Cover (1 pc.)
M-3x6 Screw (4 pcs.)
4-39
4.7 Wireless L AN BOARD (B-EX700-WLAN-QM-R)
WLAN Card (1 pc.)
FCC ID Sticker (1 pc.)
FCC ID : MXF-S941212G
IC ID : 3069B-WSDB101G
MAC Address
(12-digit code)
EO18-33027