Toshiba B-EX4 Series Maintenance Manual page 184

5. SYSTEM MODE
The displayed data differs depending on the module type.
B-EX700-RFID-H1-QM-R: Tag ID
B-EX700-RFID-U2-EU/US-R, B-EX700-RFID-U4-R, B-EX700-RFID-U4-EU/US-R, U4 module
preinstall model (B-EX4T1/EX4T2-GS18/TS18-CN-R): EPC code of EPC area
・ In the case of 32 digits or more data, only the first 32 digits are displayed. When data is less than
32 digits, the vacant digits will be filled with spaces.
・ If more than one tag is read at one time, especially when short-pitch tags are used, pressing the
[UP] or [DOWN] key shows the other tags' data.
5.11.2 MODULE
The following information related to the module setting is displayed.
・ MODULE TYPE
・ COUNTRY
・ TAG
・ RF CHANNEL
・ NONE
・ H1
・ H2
・ U2
NOTE: This setting will become effective after the printer power is turned off, and back to on.
5.11.2.1 MODULE TYPE
No RFID module is installed.
B-EX700-RFID-H1-QM-R
B-EX700-RFID-H2-R
B-EX700-RFID-U2-EU-R (Europe, India)
B-EX700-RFID-U2-US-R (North America, Australia, Taiwan, Korea)
B-EX700-RFID-U4-R (Japan)
B-EX700-RFID-U4-EU-R (Europe)
B-EX700-RFID-U4-US-R (Korea)
U4 module preinstall model (B-EX4T1/EX4T2-GS18/TS18-CN-R) (China)
5-88
EO18-33027
5.11 RFID Module Setting