Toshiba B-EX4 Series Maintenance Manual page 90

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
All the following parts are supplied with the kit. Make sure you have all items shown below.
RFID Plate (1 pc.)
Earth Plate (1 pc.)
PT-3x6 P-TITE Screw
(5 pcs.)
SMW-3x25 Double Sems
Screw (2 pcs.)
NOTE:
To install the B-EX700-RFID-H1-QM-R in the printer, TAGSYS RFID Module MEDIO
antenna are required separately. Before installation, solder the supplied Interface Cable to the RFID module as
shown in the picture below, and attach the RFID Module and the Antenna to the RFID Plate and the Antenna
Frame, respectively.
Interface Cable
Antenna Frame (1 pc.)
Bush (1 pc.)
Spacer (Short) (2 pcs.)
Spacer (Long) (2 pcs.)
RFID Module
4-72
4.11 HF RFID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R)
Ribbon Guide (1 pc.)
Interface Cable (1 pc.)
Nylon Washer (2 pcs.)
Cable Clamp (1 pc.)
(Not used)
EO18-33027
(Revision Date: Aug. 24, 2011)
Module Attachment Plate
(2 pcs.)
SMW-3x6 Double Sems
Screw (1 pc.)
SMW-2ｘ10 Double Sems
Screw (2 pcs.)
Installation Manual
(1 copy)
TM
S002 and the exclusive
Antenna