Parallel Interface Board (B-Ex700-Cen-Qm-R) - Toshiba B-EX4 Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

4.8 PARALLEL INTERFACE BOARD (B-EX700-CEN-QM-R)

The following parts are supplied with the kit. Make sure you have all items shown below.
Parallel Interface Board (1 pc.)
1. Turn the printer power off and disconnect the Power Cord.
2. Remove the three B-4x5 screws from the Side Panel (L).
3. Slide the Side Panel (L) backward, and raise it to remove from the printer.
4. Unfold the upper tabs of the blind plate indicated by the arrow, then pull and remove the blind plate
from the printer back.
M-3x6 Screw (2 pcs.)
B-4x5 Screw
Tab
4.8 Parallel Interface Board (B-EX700-CEN-QM-R)
Installation Manual (1 copy)
B-4x5 Screw
Tab
4-43
Side Panel (L)
EO18-33027
Blind Plate