Note For Optional Equipment Installation /Major Unit Replacement/Maintenance - Toshiba B-EX4 Series Maintenance Manual

3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT
/MAINTENANCE
3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION
/MAJOR UNIT REPLACEMENT/MAINTENANCE
1. Turn the power off and disconnect the power cord before replacing the main parts.
T1/T2 series
Power Cord
T3 series
2. Never perform disassembling, assembling, and cleaning just after printing. Doing so may cause
you to be injured by the print head and the inner parts of the printer being hot.
3. When cleaning the cutter, be careful not to be injured by the cutter blade.
4. Be careful not to pinch your fingers or hands with the covers.
CAUTION!
1. Fix the harnesses and the cord bushes with the cable clamp. Failure to do this may cause the
covers to catch them.
Sensor Harness
3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT/MAINTENANCE
Power Switch
Cable Clamp
Operation Panel
Print Head Harness
Harness
WARNING!
continued
3-1
(Revised on AUG. 2016)
Power Cord
Power Switch
Cable Clamp
Stepping Motor Cable
Cord Bush
EO18-33027