Battery Service; Battery Terminals / Bolts; Battery Terminal Block; Battery Activation - Polaris RANGER 500 2017 Service Manual

BATTERY SERVICE

BATTERY TERMINALS / BOLTS

Use Polaris corrosion resistant Nyogel™ grease (PN
2871329) on battery terminal bolts.

BATTERY TERMINAL BLOCK

q
The terminal block is located under the hood next to
the battery and fuse box. The terminal block provides
easy hookup for accessories.
TORQUE
Terminal Block Nuts:
20-25 in-lbs (2.3-2.8 Nm)
WARNING
CALIFORNIA PROPOSITION 65 WARNING:
Batteries, battery posts, terminals and related
accessories contain lead and lead compounds, and
other chemicals known to the State of California to
cause cancer and birth defects or other reproductive
harm. WASH HANDS AFTER HANDLING.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.

BATTERY ACTIVATION

WARNING
Battery electrolyte is poisonous. It contains sulfuric
acid. Serious burns can result from contact with skin,
eyes or clothing. Antidote:
External: Flush with water.
Internal: Drink large quantities of water or milk. Follow
with milk of magnesia, beaten egg, or vegetable oil. Call
physician immediately.
Eyes: Flush with water for 15 minutes and get prompt
medical attention.
Batteries produce explosive gases. Keep sparks, flame,
cigarettes etc. away.
Ventilate when charging or using in an enclosed space.
Always shield eyes when working near batteries.
KEEP OUT OF REACH OF CHILDREN.
WARNING
The gases given off by a battery are explosive. Any
spark or open flame near a battery can cause an
explosion which will spray battery acid on anyone close
to it. Should there be contact with battery acid, wash the
affected area with large quantities of cool water and
seek immediate medical attention.
To ensure maximum service life and performance from a
new battery, perform the following steps.
NOTICE
Do not service the battery unless it will be put into
regular service within 30 days. After initial service, add
only distilled water to the battery. Never add electrolyte
after a battery has been in service.
NOTICE
New Battery: Battery must be fully charged before use
or battery life will be significantly reduced 10-30% of the
battery's full potential.
To activate a new battery:
1. Remove all the filling plugs.
2. Remove the sealing tube (red cap) from vent fitting.
3. Place battery on a level surface. Fill battery with
electrolyte to upper level marks on the battery case.
NOTICE
Never activate a battery on the vehicle. Electrolyte
spillage can cause damage.
4. Set battery aside to allow for acid absorption and
stabilization for 30 minutes.
ELECTRICAL
12
12.29