Switches / Controls; Ignition / Headlight Switch; Awd / 2Wd / Turf Switch - Polaris RANGER 500 2017 Service Manual

SWITCHES / CONTROLS

IGNITION / HEADLIGHT SWITCH

1. Open the hood (see Chapter 5).
2. Disconnect the ignition
depressing the connector lock and pulling on the
connector. Do not pull on the wiring.
3. Inspect the switch connections and test the switch
for continuity.
• Turn the ignition key to ON LIGHTS. There should be
continuity between switch pins C and D; A, E and F.
• Turn the ignition key to ON. There should be continuity
between switch pins C and D; E and F.
• Turn the ignition key to START. There should be
continuity between switch pins A and B; C and D; E
and F.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.

AWD / 2WD / TURF SWITCH

1. Remove the dash panel from the dash (see Chapter
switch harness, by
2. Disconnect the switch harness (Gray, Orange/White,
3. Inspect the switch connections and test the switch
• When the switch is in position #1 (AWD), there should
be continuity between terminals 2 (Orange/White) and
3 (Gray).
• When the switch is in position #3 (TURF), there should
be continuity between terminals 1 (White/Green) and 2
(Orange/White).
5).
Brown, White/Green), by depressing the connector
lock and pulling on the connector. Do not pull on the
wiring.
for continuity.
ELECTRICAL
12
12.5