Polaris RANGER 500 2017 Service Manual page 422

FINAL DRIVE
5. Remove the torsion spring retainer
y
spring from the top of the ring gear.
6. Remove the clutch housing / ring gear and roll cage
u
assembly from the gearcase housing.
8.16
t
and torsion 7. Remove the RH output hub assembly
gearcase housing.
8. Remove pinion seal
pinion gear assembly
Inspect and clean the gearcase housing and replace
all oil seals and O-rings.
9. Inspect the pinion gear
missing teeth. Inspect the pinion bearing for signs of
wear and the pinion shaft seal surface for pitting.
o
, internal retaining ring
s
from the gearcase housing.
s
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
i
from the
a
, and
for chipped, broken or
© Copyright Polaris Inc.