Polaris RANGER 500 2017 Service Manual page 226

ENGINE / COOLING SYSTEM
4. Inspect inside of hub
surface.
5. Inspect crankshaft bearing surface for abnormal
wear.
6. Remove starter gear from the flywheel assembly.
3.70
q
for wear, galling, or uneven 7. Remove the three, one-way clutch retaining bolts.
8. Remove clutch and inspect both sides of drive rollers
w
and roller contact surface
damage, or uneven surface.
9. Inspect drive surface of starter gear
t
surface for wear, damage, or uneven surface. If
any starter clutch component is worn or damaged,
replace clutch, clutch hub, and starter gear.
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
e
inside hub for wear,
r
and bearing
© Copyright Polaris Inc.